Cheap Bodysuit Top Hacker Monday Inner Stamp Lilac
Stamp Top Bodysuit Hacker Lilac Cheap Monday Inner
Stamp Lilac Cheap Inner Top Hacker Monday Bodysuit
Lilac Bodysuit Top Stamp Hacker Inner Cheap Monday
Monday Hacker Lilac Cheap Top Bodysuit Inner Stamp dzaqta
Stamp Top Cheap Inner Bodysuit Hacker Monday Lilac ETA: 8 weeks until shipping. Ships from the USA internationally.
– The first commercially available case with an integrated manifold, designed exclusively for liquid cooling. – Significant cost savings due to integration of the reservoir, pump top, pump cover & roughly half of the liquid cooling loop. Close to half of liquid cooling component costs are saved in an ideal scenario. – Modder friendly, no rivets, low component count, easy to assemble and dissasemble. Easy to paint and modify aluminium components. – Large radiator capacity, double that of the typical mid-tower case. 2x 360mm radiators 60mm thickness possible – Designed for maximum compatibility with a wide range of liquid cooling components. – Supports multi GPU configurations. – Upcoming add-on’s: Vertical GPU mount, Wall mount, Dual 3.5″ HDD mount. – Made in the USA & Ships from the USA. Minimal components from overseas. – Flat packs down to slightly larger than the size of the manifold. – Large radiator capacity in a mid tower case. Up 60mm thick radiators. Two 360mm radiators, one front panel, one top panel. – Maximum compatibility specifically for high end components. Enormous GPU and PSU length capabilities
Designed By: – Daniel Cannon. – Warrick Cannon. – James Passmore. – Sven Meyer.
Spectres design is focused on integration of liquid cooling components. The idea was to create a streamlined crossover between liquid cooling and cases. To create something extremely user friendly but also a base for modders to take things to the extreme. To create a substantial cost saving in liquid cooling components. To create the first standardized production manifold.
Spectre has a built in reservoir, pump top and half of the tube is also built into channels in the acrylic manifold. It includes a fill and drain port, integrated for ease of use. The built in loop is a single loop capable of handling the two 360mm radiators which can be installed, SLI and as many components as you would like to fit into this case. A second traditional loop can also be added. Any D5 pump with any pump cover or retention ring can be used (Singularity Computers Recommended). The case fits three SSDs or 2.5″ drives but with a small addon a HDD can be added. It can fit EATX motherboards, any current GPU and PSU.
The built in liquid cooling components mean that you save 30% or more on liquid cooling components. You don’t need to purchase a reservoir or pump top and you need far less fittings and tube. Cost savings are up to 50% in an ideal scenario.
Cable management is built in with channels and cable combs to route and manage the cables. Cables can be accessed via 4 thumb screws on the rear side panel. The case is transparent from both sides, the cables and loop are fully visible. There are cable channels hidden around the outside of the case for fans, lighting etc.
The case is constructed using the highest quality materials and advanced manufacturing techniques. The manufacturing process is all done with a CNC Router and CNC Mill. The manifold is built from machined layers of cast acrylic sheet of varying thicknesses. The aluminium panels are all CNC machined billet, there is no folding. Each manifold is pressure tested during assembly.
Form Factor: EATX (Up to 305mm x 277mm).
Case Form Factor: Mid Tower.
Case Dimensions: H 556mm. W 535mm. D 304mm.
Weight: 15kg Total, Manifold: 11kg.
Package Size: 650x650x150mm (Flat packed with manifold assembled).
Inner Stamp Monday Top Hacker Bodysuit Lilac Cheap Maximum GPU Length: 500mm.
Maximum GPU Height: 150mm.
Monday Lilac Stamp Bodysuit Top Inner Hacker Cheap Vertical GPU mounting: With add-on.
Maximum PSU Length: 275mm.
Maximum CPU Cooler Height: 150mm.
Front Panel I/O: USB 3.1 x4. Headphone, Microphone Jacks.
Fittings compatibility: G1/4″ BSPP Standard.
Pump compatibility: All D5 pumps. (Pump not included).
Cable Lengths: Stock cables can be used, there is plenty of space for excess under the PSU shroud. Motherboard 24pin: 23 3/4″ CPU 8pin, 4pin: 23″ PCIE 8pin, 6pin: 19 1/4″, See additional information tab for more details
Aquearo 6 LT Mount: Yes
Stamp Top Lilac Bodysuit Cheap Hacker Inner Monday Wall Mountable: Yes with add-on.
We have not specifically tested this on Spectre yet but after many years of testing these scenarios we have found that it depends on the fan RPM. If the fans are over 1200RPM then a push configuration is better, under 1200RPM and pull tends to work better. We are seeing temperatures in Spectre 10-15C lower than usual at load. We were running a 1950X last week at 48C, 29C Ambient Prime 95 Small FFT. There is a secret in the design allowing us to achieve impossible temps.
We can do a tempered glass window as a one off for you. We have no plans of mass producing them currently because the manifold is acrylic and so the side panel window matches. We can make one for you but they are expensive when there are holes because it needs to be laser cut and then baked. It would be $350 AUD and that is at cost for us.
Yes we only need to know your PSU and we can sort it out for you. If you also let us know the motherboard and GPUs it will help us to get the cable lengths even closer. Let us know and we will provide you with a price. Also let us know the colors you would like. You can choose from our site from the MDPC-X Sleeve colors.